|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent service manual includes everything is need to repair this radio-caseete, how to disassemble, wiring diagram, all , waiting time until the download was only a few hours. I'm going to buy service manuals from here, are cheap and very good.Thank you.
;
Good service manual,i saved from scrapping this deck,is now fully functional.Thanks.
 ;
Found this to be the manual included with the original packinging, was helpfull but did not give any detailed repair instructions.
;
Complete service manual, was very helpful in repairing this tapedeck.Thanks.
;
The service manual was a copy of the original from Wirlpool. The quality was good, all neccecary information was available including the service-codenumbers, so I could order the right part to be replaced for repair.
Downloding was no probem after the payment.
Thanks for the service!
ADJUSTMENT INSTRUCTIONS
1. Application Object
These instructions are applied to all of the color TV, MC-05HA chassis. 8) After checking �40�, Click the Erase Flash button.
2. Notes
(1) Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument. (2) Adjustment must be done in the correct order.But the adjustment can be changed by consideration of mass production. (3) The adjustment must be performed in the circumstance of 25±5°C of temperature and 65±10% of relative humidity if there is no specific designation. (4) The input AC voltage of the receiver must keep rating voltage in adjusting. (5) The receiver must be operated for about 15 minutes prior to the adjustment.
9) Double click �Edit Window�.
3. Soft ware download
1) Connect JIG to P004 of Digital Board. 2) Connect SCL line of JIG Switch to Ground. 3) Turn on JIG and supply 6V to Digital Board. Terminate the SCL of clause 2) by using Switch. 4) After termination of SCL line, wait for 3 second. 5) Execute �vct69xyp_main_graphic.vi2c� program. 6) Click the TVT button.
10) Click the file select button of Name to select file.
7) Double click right check box of �Boot loader Version� line, and then check to change to 40 from 0.
11) Select necessary file.
-8-
|
|
|
> |
|
